Captain Cooks paytables when a desktop example becomes a phone-sized view
You found a payout example for Captain Cooks on a desktop screen, and now the same information sits on a narrow phone display where columns wrap, labels truncate and the stake line may scroll out of sight. The payout number has not changed, but the context that gives it meaning is easier to lose. What follows is a way to read that example on a small screen so the figure you take away matches the stake it was actually calculated on.
Why the stake basis decides what a Captain Cooks payout means
A paytable multiple is a multiplier applied to one stated base, and that base might be the total stake for the round, the stake on a single winning line, a denomination, or another defined unit. The number alone cannot tell you which. A figure of 50 could mean 50 times a one-dollar line stake or 50 times a twenty-dollar total; the multiple is identical while the payout differs enormously. The base is not a detail you can reconstruct later from the size of the result, because dividing a payout by a multiple only produces a candidate number, never proof that the number is a total stake rather than a line stake or a denomination. Treat the named base as part of the award itself. On a desktop screen the paytable often shows the base in a header or a side column that stays visible. On a narrow phone screen that header may be above the fold, collapsed, or wrapped so the words total stake and line stake no longer sit beside the numbers they qualify. Before you read any payout figure for Captain Cooks, find the label that says what the multiple applies to and hold it in mind as you scroll. If the label is genuinely absent from what you can see, the honest position is that the base is unconfirmed, and the example should be treated as illustrative rather than a figure you can apply to your own stake. When you are considering options connected with https://bodybyscience.net/, match a displayed payout to the stake basis used in its example.
The line structure adds a second layer that small screens tend to hide. Activating more lines does not automatically scale a per-line award, because the award belongs to the line that won and not to the total number of lines in play. Two things can be true at once: a per-line multiple can stay fixed while the number of lines changes, and the total amount at risk can change with it. What stays constant depends on the setting, and you should not assume that either the total stake or the per-line stake is the fixed one. If the total stake is fixed and you add equally staked lines, each line stake falls, so a per-line award falls with it even though the multiple is unchanged. If the per-line stake is fixed and you add lines, the total stake rises. The paytable example will reflect whichever arrangement it was written around, and on a phone the line count and the stake per line are often separated by several wrapped rows. Read them as a pair before you trust any figure.
Working through a payout example with stated line stakes
Suppose the example you are reading shows a multiple of 40 and states that it applies to the line stake, with a line stake of 0.50 and three winning lines each carrying that same award. The calculation is 40 times 0.50, which is 20 per winning line, and three such lines give 60 in total. Notice what that 60 represents: it is the sum of the three stated awards, and the combined winning-line stakes were 1.50, not the full amount staked on the round if other lines were also active. The full round stake could be larger, and the example does not tell you it was smaller or equal. If instead the paytable said the 40 applied to a total stake of 2.00, the same multiple would yield 80, and the arithmetic would be complete without any line-by-line addition. Same multiple, different base, different result. That is exactly why the base has to be read from the label rather than inferred from the payout figure you remember from the desktop view.
On a narrow phone, the multiple, base label and stake may be split across a card, a scrolled-away heading and a footnote. Read the base label in full first, then the stake matching that base, noting its unit. Identify each winning line’s stake and award separately, and sum only stated awards. Never infer a line combination from a tidy quotient, and judge any later correction by what it actually establishes.
Deciding which payout figure to trust on a small screen
A practical method is to decide, before you scroll, which single question the example must answer for you. If you want to know what one winning line pays at your own line stake, you need the per-line base and the per-line stake, and you can ignore the total until later. If you want to know the most a round could return, you need the total-stake base and the full round stake, and a per-line figure will not get you there without the line count and the stake per line. Write the question down in plain words, then read the paytable from the top so the headings load before the numbers. On a narrow screen, zooming out to see the whole table at once often makes the text too small to read accurately, so it is usually better to zoom in and scroll deliberately, keeping the base label in view by noting it before you move to the figures. If a table resists reading because columns overlap, look for a list or stacked layout of the same information rather than guessing at a wrapped cell.
Then apply a simple test to any figure you plan to keep. Can you state the base, the stake and the unit in one sentence without looking back? If you can say that the multiple applies to a line stake of 0.50 and that three stated winning lines each paid 20, the figure is grounded. If you can only say that the payout was 60, you have a number without a basis, and it will mislead you the moment your own stake differs. Check whether the example’s stake matches the stake you actually intend to use; if it does not, the multiple can still be applied, but only to the same kind of base at your own figure. Where Captain Cooks provides a search function, a help panel or an account tool that shows stake settings, use it if it exists to confirm the base label, but do not assume such a tool is available. The decision rule stands on its own: no stated base, no confident payout. When the base is clear, the phone screen stops being an obstacle and becomes just a smaller window onto the same arithmetic.
A payout example only means something when its stake basis travels with it. On a narrow screen, that basis is the first thing to check and the last thing to record, and a multiple is applied to the base the paytable names, not to whichever total happens to sit nearby. Once you have matched label, units and stake, the figure you carry away is the one the example actually supports.